BK-01 BLUE Bausch 200 Micron Articulating paper with progressive colour transfer, that highlights overall pressure distribution by means of different colour shades. The lighter the bite, the lighter the mark The harder the bite the harder the mark 300 Strips 200 Microns

BK-02 RED Bausch 200 Micron Articulating paper with progressive colour transfer, that highlights overall pressure distribution by means of different colour shades. The lighter the bite, the lighter the mark The harder the bite the harder the mark 300 Strips 200 Microns

Bausch Articulating Silk is made from high quality natural silk featuring the same properties as Bausch 200µ Articulating Papers with progressive color transfer. This silk is highly tear-resistant and, because of its low thickness and good flexibility, it adapts perfectly to cusps and fossae. The marking of silk is extremely precise and therefore suitable for more delicate preparations. Natural silk consists of fibrils, a tube-shaped protein structure which, because of its composition, has an extremely high color reservoir capacity. Articulating Silk is especially suitable for the use on a laboratory model because one strip can be used up to ten times and is thus extremely economical. 16mm wide blue 10m

BK-09 BLUE Bausch 40µ micro-thin Articulating Papers are extremely thin and tear resistant and are coated with liquid colors on both sides. These papers mark precisely because of the thin material; false or smear contacts can thus be avoided. The special coating with liquid colors facilitates accurate marking of all occlusal contacts or occlusal interferences. Moist occlusal surfaces such as gold, ceramic, polished metal or acrylic, which are difficult to examine, do not pose any problem. The special color coating with liquid colors consists of many color-filled microcapsules. Even the slightest masticatory pressure can cause the capsules to burst and thus release the distinctly visible color. Also repeated marking is possible because of color regeneration. Bausch micro-thin Articulating Papers are especially suitable for the two-tone representation of static and dynamic occlusion. The first step is to inspect the concentric contact (static occlusion) in red, and the second step to inspect the eccentric contacts (dynamic occlusion) in blue. The color sequence can, of course, be altered

BK-285 WHITE Arti-Spray is a universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges. Arti-Spray is easy to handle and leaves a thin colored film which can easily be removed with water, leaving no trace of residues. Apply at a distance of 3-5 cm onto the occlusal surface or inside the bridge or crown. When testing occlusion or trial seating the bridge or crown, all contact points will be immediately visible. Arti-Spray®can be used for approximal contacts when trial seating crowns and bridges. Arti-Spray contains physiologically safe ingredients and is filled with environmentally neutral propellants. Arti-Spray consists of physiologically safe ingredients which meet the requirements of the European Council Directive 93/42/EEC for medical devices.

BK-286 RED Arti-Spray is a universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges. Arti-Spray is easy to handle and leaves a thin colored film which can easily be removed with water, leaving no trace of residues. Apply at a distance of 3-5 cm onto the occlusal surface or inside the bridge or crown. When testing occlusion or trial seating the bridge or crown, all contact points will be immediately visible. Arti-Spray®can be used for approximal contacts when trial seating crowns and bridges. Arti-Spray contains physiologically safe ingredients and is filled with environmentally neutral propellants. Arti-Spray consists of physiologically safe ingredients which meet the requirements of the European Council Directive 93/42/EEC for medical devices.

BK-287 BLUE Arti-Spray is a universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges. Arti-Spray is easy to handle and leaves a thin colored film which can easily be removed with water, leaving no trace of residues. Apply at a distance of 3-5 cm onto the occlusal surface or inside the bridge or crown. When testing occlusion or trial seating the bridge or crown, all contact points will be immediately visible. Arti-Spray®can be used for approximal contacts when trial seating crowns and bridges. Arti-Spray contains physiologically safe ingredients and is filled with environmentally neutral propellants. Arti-Spray consists of physiologically safe ingredients which meet the requirements of the European Council Directive 93/42/EEC for medical devices.

BK-288 GREEN Arti-Spray is a universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges. Arti-Spray is easy to handle and leaves a thin colored film which can easily be removed with water, leaving no trace of residues. Apply at a distance of 3-5 cm onto the occlusal surface or inside the bridge or crown. When testing occlusion or trial seating the bridge or crown, all contact points will be immediately visible. Arti-Spray®can be used for approximal contacts when trial seating crowns and bridges. Arti-Spray contains physiologically safe ingredients and is filled with environmentally neutral propellants. Arti-Spray consists of physiologically safe ingredients which meet the requirements of the European Council Directive 93/42/EEC for medical devices.

BK-30 BLACK (One Sided) Bausch Arti-fol Arti-Fol 12 Micron Metalic is a high test film which ditinclty improved features. This test film is made of Polyester film (shimstock film) only 12 Micron thinck. The combination of a newly created colour coating and metalic film offers certain advantages in some applications. This film possesses excellant colour transfer. High spots can be easily detected, especially on ceramic or highly polished metal surfaces. This film is antistatic and can easily be applied without using forceps. It is also extremely tear resistant and ideal for resilence testing. In contrast to the conventional shimstock film this Arti-Fol Metalic marks the respective high spot precisely. Since the back of the film is metalic, it is obvious which side is colour coated and which side is not. Arti-fol Metalic is tear resistant and only 12 Micron thick. It is therefore ideal for checking approximal contact points when fixing dental bridges and crowns.

BK-31 (One Sided) Bausch Arti-fol Arti-Fol 12 Micron Metalic is a high test film which ditinclty improved features. This test film is made of Polyester film (shimstock film) only 12 Micron thinck. The combination of a newly created colour coating and metalic film offers certain advantages in some applications. This film possesses excellant colour transfer. High spots can be easily detected, especially on ceramic or highly polished metal surfaces. This film is antistatic and can easily be applied without using forceps. It is also extremely tear resistant and ideal for resilence testing. In contrast to the conventional shimstock film this Arti-Fol Metalic marks the respective high spot precisely. Since the back of the film is metalic, it is obvious which side is colour coated and which side is not. Arti-fol Metalic is tear resistant and only 12 Micron thick. It is therefore ideal for checking approximal contact points when fixing dental bridges and crowns.

BK-32 GREEN (One Sided) Bausch Arti-fol Arti-Fol 12 Micron Metalic is a high test film which ditinclty improved features. This test film is made of Polyester film (shimstock film) only 12 Micron thinck. The combination of a newly created colour coating and metalic film offers certain advantages in some applications. This film possesses excellant colour transfer. High spots can be easily detected, especially on ceramic or highly polished metal surfaces. This film is antistatic and can easily be applied without using forceps. It is also extremely tear resistant and ideal for resilence testing. In contrast to the conventional shimstock film this Arti-Fol Metalic marks the respective high spot precisely. Since the back of the film is metalic, it is obvious which side is colour coated and which side is not. Arti-fol Metalic is tear resistant and only 12 Micron thick. It is therefore ideal for checking approximal contact points when fixing dental bridges and crowns.

BK-33 BLUE (One Sided) Bausch Arti-fol Arti-Fol 12 Micron Metalic is a high test film which ditinclty improved features. This test film is made of Polyester film (shimstock film) only 12 Micron thinck. The combination of a newly created colour coating and metalic film offers certain advantages in some applications. This film possesses excellant colour transfer. High spots can be easily detected, especially on ceramic or highly polished metal surfaces. This film is antistatic and can easily be applied without using forceps. It is also extremely tear resistant and ideal for resilence testing. In contrast to the conventional shimstock film this Arti-Fol Metalic marks the respective high spot precisely. Since the back of the film is metalic, it is obvious which side is colour coated and which side is not. Arti-fol Metalic is tear resistant and only 12 Micron thick. It is therefore ideal for checking approximal contact points when fixing dental bridges and crowns.

BK52 300 Strips Red This smooth fiber reinforced paper with high coloring capacity adapts perfectly to the occlusal surfaces. The occlusal contact points or centric contacts are marked very precisely because of the paper’s progressive color transfer. This 100 micron paper is impregnated with hydrophilic waxes and pharmaceutical oils. This unique combination with the bonding agent Transculase® enhances detection of high spots on hard to locate surfaces, such as highly polished metals or ceramics. Its hydrophilic properties make it advantageous for use on moist occlusal surfaces - a highly desirable attribute.